| 當前位置：首頁->方案設計 |
|
| UCD3138可編數字電源控制器參考設計 |
|
|
| 文章來源： 更新時間：2014/12/22 11:16:00 |
在線咨詢： |
| |
TI公司的UCD3138是可編數字電源控制器, 在單一芯片解決方案內提供高集成度和出色性能.控制器的內核是數字控制環路外設，也被稱為數字電源外設(DPP)。每個DPP 執行一個高速數字控制環路，此環路由一個專用誤差模數轉換器(EADC),一個基于2 極- 2 零數字補償器的PID 和具有250ps 脈寬分辨率的DPWM 輸出組成。其靈活的特性使得此器件適合于品種繁多的電源轉換應用如軍用雷達,電信DC/DC模塊,服務器AC/DC電源等.本文介紹了UCD3138主要特性,框圖,應用電路,以及評估板UCD3138A64OEVM-662 EVM主要特性,測試連接圖,電路圖,材料清單和PCB元件布局圖.
The UCD3138 family is a digital power supply controller from Texas Instruments offering superior levels of integration and performance in a single chip solution. The UCD3138x, in comparison to Texas Instruments UCD3138x digital power controller offers 64 kB of program Flash memory in UCD3138A64 (128 KB in UCD3138128) and additional options for communication such as SPI and a second I2C port. The availability of of program Flash memory in multiple 32 kB banks enables designers to implement dual images of firmware (e.g. one main image + one back-up image) in the device and provides the option to execute from either of the banks using appropriate algorithms. It also creates the unique opportunity for the processor to load a new program and subsequently execute that program without interrupting power delivery. This feature allows the end user to add new features to the power supply in the field while eliminating any down-time required to load the new program.
The flexible nature of the UCD3138 family makes it suitable for a wide variety of power conversion applications. In addition, multiple peripherals inside the device have been specifically optimized to enhance the performance of AC/DC and isolated DC/DC applications and reduce the solution component count in the IT and network infrastructure space. The UCD3138 family is a fully programmable solution offering customers complete control of their application, along with ample ability to differentiate their solution. At the same time, TI is committed to simplifying our customer’s development effort through offering best in class development tools, including application firmware, Code Composer StudioTM software development environment, and TI’s Fusion Power Development GUI which enables customers to configure and monitor key system parameters.
At the core of the controller are the Digital Power Peripherals (DPP). Each DPP implements a high speed digital control loop consisting of a dedicated Error Analog to Digital Converter (EADC), a PID based 2 pole - 2 zero digital compensator and DPWM outputs with 250ps pulse width resolution. The device also contains a 12-bit, 267 ksps general purpose ADC with up to 15 channels, timers, interrupt control, PMBus, I2C, SPI and UART communications ports. The device is based on a 32-bit ARM7TDMI-S RISC microcontroller that performs real-time monitoring, configures peripherals and manages communications. The ARM microcontroller executes its program out of programmable flash memory as well as on chip RAM and ROM.
In addition to the DPP, specific power management peripherals have been added to enable high efficiency across the entire operating range, high integration for increased power density, reliability, and lowest overall system cost and high flexibility with support for the widest number of control schemes and topologies. Such peripherals include: light load burst mode, synchronous rectification, LLC and phase shifted full bridge mode switching, input voltage feed forward, copper trace current sense, ideal diode emulation, constant current constant power control, synchronous rectification soft on and off, peak current mode control, flux balancing, secondary side input voltage sensing, high resolution current sharing, hardware configurable soft start with pre bias, as well as several other features. Topology support has been optimized for voltage mode and peak current mode controlled phase shifted full bridge, single and dual phase PFC, bridgeless PFC, hard switched full bridge and half bridge, active clamp forward converter, two switch forward converter and LLC half bridge and full bridge.
UCD3138主要特性:
64 kB and 128 kB Program Flash Derivative of UCD3138 Family
2-32 kB or 4-32 kB Program Flash Memory Banks
Supports Execution From 1 Bank, While Programming Another
Capability to Update Firmware Without Shutting Down the Power Supply
Additional Communication Ports Compared to the UCD3138 (+1 SPI, +1 I2C)
Boot Flash Based Dual Memory Image Support for ‘On the Fly’ Firmware Updates
Digital Control of up to 3 Independent Feedback Loops
Dedicated PID Based Hardware
2-pole/2-zero Configurable, Non-Linear Control
Up to 16 MSPS Error A/D Converter (EADC)
Configurable Resolution (min: 1mV/LSB)
Up to 8x Oversampling and Adaptive Sample Positioning
Hardware Based Averaging (up to 8x)
14 bit Effective Reference DAC
Up to 8 High Resolution Digital Pulse Width Modulated (DPWM) Outputs
250 ps Pulse Width Resolution
4 ns Frequency and Phase Resolution
Adjustable Phase Shift and Dead-bands
Cycle-by-Cycle Duty Cycle Matching
Up to 2 MHz Switching Frequency
Configurable Trailing/Leading/Triangular Modulation
RTC support
Configurable Feedback Control
Voltage, Average Current and Peak Current Mode Control
Constant Current, Constant Power
Configurable FM, Phase Shift Modulation and PWM
Fast, Automatic and Smooth Mode Switching
Frequency Modulation and PWM
Phase Shift Modulation and PWM
High Efficiency and Light Load Management
Burst Mode & Ideal Diode Emulation
Synchronous Rectifier Soft On/Off
Low IC Standby Power
Primary Side Voltage Sensing
Current Share (Average & Master/Slave)
Feature Rich Fault Protection Options
7 Analog / 4 Digital Comparators,
Cycle-by-Cycle Current Limiting
Programmable Blanking Time and Fault Counting
External Fault Inputs
Synchronization of DPWM Waveforms Between Multiple UCD3138x Devices
15 channel, 12 bit, 267 ksps General Purpose ADC
Internal Temperature Sensor
Fully Programmable High-Performance 31.25 MHz, 32-bit ARM7TDMI-S Processor
64 kB Program Flash (2-32 kB Banks)
2 kB Data Flash with ECC
8 kB Data RAM
4 kB Boot ROM Enables Firmware Boot-Load
Communication Peripherals,
2 - I2C/PMBus interfaces
2 - UARTs, 1 - SPI
Timer Capture with Selectable Input Pins
80-pin QFP Package
Operating Temperature: –40°C to 125°C
UCD3138應用:
Power Supplies and Telecom Rectifiers
Power Factor Correction
Isolated DC-DC Modules
Phase Shifted Full Bridge with Peak Current Mode Control, LLC, HSFB, Forward, etc.
圖1. UCD3138框圖
圖2. UCD3138 DC/DC轉換器電路圖
UCD3138A64評估板UCD3138A64OEVM-662 EVM
CD3138A64 Programmable Digital Power Controller Open Loop Evaluation Module
The UCD3138A64OEVM-662 EVM offers an easy to use test platform for stand-alone evaluation of UCD3138A64 digital controller optimized for isolated power applications. Featuring an 80-pin socket and a comprehensive set of test points, the EVM allows hardware and firmware engineers to manipulate signals on the different pins of the device individually and study open loop operation. The EVM also offers the flexibility to realize simple closed loop control configurations (eg. using RC circuits to filter PWM output signals and regulate a DC voltage in closed loop control).
Hardware ports available to communicate with the device include PMBus and UART. The EVM accepts up to 5V DC input and an on-board 3.3V LDO can be used to bias the device. Alternately, using jumpers, the device can be biased using the PMBus communication pins.
評估板UCD3138A64OEVM-662 EVM主要特性:
Test points for easy access to all pins of UCD3138A64 80-pin digital controller
Socket for easy removal/replacement of the device
All GPIO and ADC12 pins accessible (with on-board RC filters on each pin)
Capability to adapt EVM for various evaluation targets using jumpers
Hardware terminals: PMBus, UART, and Logic Analyzer
Includes On-board SPI and I2C accessible EEPROMs for additional memory storage
External 5.0V supply input with onboard 3.3V LDO to bias the device (option to bias device using PMBus ports)
圖3. 評估板UCD3138A64OEVM-662 EVM外形圖
評估板UCD3138A64OEVM-662 EVM包括:
UCD3138A64 function evaluation
Firmware debug
Hardware design assistance
圖4. 評估板UCD3138A64OEVM-662 EVM測試連接圖
圖5. 評估板UCD3138A64OEVM-662 EVM電路圖(1)
圖6. 評估板UCD3138A64OEVM-662 EVM電路圖(2)
圖7. 評估板UCD3138A64OEVM-662 EVM電路圖(3)
圖8. 評估板UCD3138A64OEVM-662 EVM電路圖(4)
圖9. 評估板UCD3138A64OEVM-662 EVM電路圖(5)
圖10. 評估板UCD3138A64OEVM-662 EVM電路圖(6)
圖11. 評估板UCD3138A64OEVM-662 EVM電路圖(7)
圖12. 評估板UCD3138A64OEVM-662 EVM電路圖(8)
圖13. 評估板UCD3138A64OEVM-662 EVM電路圖(9)
圖14. 評估板UCD3138A64OEVM-662 EVM電路圖(10)
評估板UCD3138A64OEVM-662 EVM材料清單:
圖15. 評估板UCD3138A64OEVM-662 EVM PCB元件分布圖;頂層
圖16. 評估板UCD3138A64OEVM-662 EVM PCB元件分布圖;底層 |
| |
|
|
|
|
|
| |
|
| |
|
|
