| 當前位置：首頁->方案設計 |
|
| CY3267 PowerPSoC智能LED照明開發方案 |
|
|
| 文章來源： 更新時間：2014/8/22 10:28:00 |
在線咨詢： |
| |
Cypress公司的CY8CLED0xD/G0y系列產品是PowerPSoC智能LED驅動器,采用可編程系統級芯片(SoC)技術,可以替代傳統的MCU,系統IC和數量巨大的分立元件.器件包括24MHz CPU,閃存編程存儲器,SRAM數據存儲器和可配置的I/O以及可編程數字和模擬系統,工作電壓7 V - 32 V,采用內置的MOSFET開關和外接MOSFET,提供1A電流,主要用于LED照明.本文介紹了PowerPSoC系列主要特性,框圖,數字和模擬系統框圖,典型應用, CY3267 PowerPSoC®照明評估板主要特性,框圖,電路圖,材料清單和評估板設計文件.
The PowerPSoC family incorporates programmable system-on-chip technology with the best in class power electronics controllers and switching devices to create easy to use power-system-on-chip solutions for lighting applications.All PowerPSoC family devices are designed to replace traditional MCUs, system ICs, and the numerous discrete components that surround them. PowerPSoC devices feature high performance power electronics including 1 ampere 2 MHz power FETs, hysteretic controllers, current sense amplifiers, and PrISM/PWM modulators to create a complete power electronics solution for LED power management. Configurable power, analog, digital, and interconnect circuitry enables a high level of integration in a host of industrial, commercial, and consumer LED lighting applications.
This architecture integrates programmable analog and digital blocks to enable you to create customized peripheral configurations that match the requirements of each individual application. Additionally, the device includes a 24 MHz CPU, Flash program memory, SRAM data memory, and configurable I/O in a range of convenient pinouts and packages.
The PowerPSoC architecture, as illustrated in the block diagrams, consists of five main areas: PSoC core, digital system, analog system, system resources, and power peripherals, which include power FETs, hysteretic controllers, current sense amplifiers, and PrISM/PWM modulators. Configurable global busing combines all of the device resources into a complete custom system. The PowerPSoC family of devices have 10-port I/Os that connect to the global digital and analog interconnects, providing access to eight digital blocks and six analog blocks.PowerPSoC is designed to operate at voltages from 7 V to 32 V, drive up to 1 ampere of current using internal MOSFET switches, and over 1 ampere with external MOSFETs.
This family of devices (CY8CLED0xD/G0y) combines up to four independent channels of constant current drivers. These drivers feature hysteretic controllers with the rogrammable System-on-Chip (PSoC) that contains an 8-bit microcontroller, configurable digital and analog peripherals, and embedded flash memory.
The CY8CLED0xD/G0y is the first product in the PowerPSoC family to integrate power peripherals to add further integration for your power electronics applications. The PowerPSoC family of intelligent power controller ICs are used in lighting applications that need traditional MCUs and discrete power electronics support. The power peripherals of the CY8CLED0xD/G0y include up to four 32 volt power MOSFETs with current ratings up to 1 ampere each. It also integrates gate drivers that enable applications to drive external MOSFETs for higher current and voltage capabilities. The controller is a programmable threshold hysteretic controller, with user-selectable feedback paths that uses the IC in current mode floating load buck, floating load buck-boost, and boost configurations.
PowerPSoC系列主要特性:
■ Integrated power peripherals
❐ Four internal 32 V low side N-Channel power FETs
• RDS(ON)– 0.5 Ω for 1.0 A devices
• Up to 2 MHz configurable switching frequency
❐ Four hysteretic controllers
• Independently programmable upper and lower thresholds
• Programmable minimum ON/OFF timers
❐ Four low side gate drivers with programmable drive strength
❐ Four precision high side current sense amplifiers
❐ Three 16-bit LED dimming modulators: PrISM,DMM, and PWM
❐ Six fast response (100 ns) voltage comparators
❐ Six 8-bit reference DACs
❐ Built-in switching regulator eliminates external 5 V supply
❐ Multiple topologies including floating load buck, floating load buck-boost, and boost
■ M8C CPU core
❐ Processor speeds up to 24 MHz
■ Advanced peripherals (PSoC® Blocks)
❐ Capacitive sensing application capability
❐ DMX512 interface
❐ I2C master or slave
❐ Full-duplex UARTs
❐ Multiple SPI masters or slaves
❐ Integrated temperature sensor
❐ Up to 12-bit ADCs
❐ 6 to 12-bit incremental ADCs
❐ Up to 9-bit DACs
❐ Programmable gain amplifiers
❐ Programmable filters and comparators
❐ 8 to 32-bit timers and counters
❐ Complex peripherals by combining blocks
❐ Configurable to all GPIO pins
■ Programmable pin configurations
❐ 25 mA sink, 10 mA source on all GPIO and function pins
❐ Pull-up, pull-down, high Z, strong, or open drain drive modes on all GPIO and function pins
❐ Up to 10 analog inputs on GPIO
❐ Two 30 mA analog outputs on GPIO
❐ Configurable interrupt on all GPIO
■ Flexible on-chip memory
❐ 16 K flash program storage 50,000 erase / write cycles
❐ 1 K SRAM data storage
❐ In-system serial programming (ISSP)
❐ Partial flash updates
❐ Flexible protection modes
❐ EEPROM emulation in flash
■ Complete development tools
❐ Free development software (PSoC Designer™)
❐ Full-featured, in-circuit emulator (ICE) and programmer
❐ Full-speed emulation
❐ Complex breakpoint structure
❐ 128 KB trace memory
PowerPSoC系列應用:
❐ Stage LED lighting
❐ Architectural LED lighting
❐ General purpose LED lighting
❐ Automotive and emergency vehicle LED lighting
❐ Landscape LED lighting
❐ Display LED lighting
❐ Effects LED lighting
❐ Signage LED lighting
■ Device options
❐ CY8CLED04D0x
• Four internal FETs with 0.5 A and 1.0 A options
• Four external gate drivers
❐ CY8CLED04G01
• Four external gate drivers
❐ CY8CLED03D0x
• Three internal FETs with 0.5 A and 1.0 A options
• Three external gate drivers
❐ CY8CLED03G01
• Three external gate drivers
❐ CY8CLED02D01
• Two 1.0 A internal FETs
• Two external gate drivers
❐ CY8CLED01D01
• One 1.0 A internal FET
• One external gate driver
■ 56-pin QFN package
圖1. PowerPSoC系列架構框圖
圖2. PowerPSoC系列數字系統框圖
圖3. PowerPSoC系列模擬系統框圖
圖4.LED照明框圖:RGGB色彩混合配置成浮動負載降壓轉換器
圖5.LED照明框圖:RGBA色彩混合驅動外接MOSFET浮動負載降壓轉換器
圖6.LED照明框圖:單路升壓驅動三路浮動負載降壓通道
CY3267 PowerPSoC®照明評估套件
Thank you for your interest in the CY3267 PowerPSoC® Lighting Evaluation Kit. This kit enables designers to evaluate Cypress’s PowerPSoC family of devices and create scalable LED management solutions. The PowerPSoC devices feature high-performance power electronics including 1 A, 2-MHz power FETs, hysteretic controllers, current sense amplifiers, and PrISM™ and pulse-width modulators (PWM) to create a complete solution for LED power management.
The CY3267 PowerPSoC Lighting Evaluation Kit demonstrates PowerPSoC’s ability to drive four LED channels (red, green, blue, and amber) at the desired color and brightness output.
Headers provided on the CY3267 Power EVK main board allow expanding the system to support external daughter cards with I2C capable interfaces. DALI and DMX512 daughter cards are examples of expandable cards, which can be used with this board.
The CY3267 PowerPSoC™ Lighting Evaluation Kit enables designers to evaluate Cypress’ PowerPSoC family of devices and demonstrates their ability to create scalable LED management solutions. The PowerPSoC devices feature high performance power electronics including 1A, 2 MHz power FETs, hysteretic controllers, current sense amplifiers, and PrISM™ modulators to create a complete solution for LED power management. Right out of the box, the CY3267 Kit can be used to evaluate PowerPSoC’s ability to drive 4 LED channels (Red, Green, Blue and Amber) at the desired color and brightness output.
圖7.CY3267 PowerPSoC®照明評估板外形圖
CY3267 PowerPSoC®照明評估板包括:
The CY3267 PowerPSoC Lighting Evaluation Kit contains:
CY3267 PowerPSoC main board
CY3267 LED daughter board
12 V, 2 A power supply
Optical diffuser
Retractable USB cable
CY3217-MiniProg1 Programmer
5 PowerPSoC CY8CLED04D01-56LTXI samples
Quick Start Guide
Kit CD which includes
PSoC Designer
PSoC Programmer
Intelligent Lighting Control GUI
Demo firmware
Design files
Related documents
CY3267 PowerPSoC®照明評估板主要特性:
Out-of-box evaluation experience using the PowerPSoC Main Board, RGBA LED daughter card and Intelligent Lighting Control GUI, all included in the kit
Kit default firmware demonstrates HB-LED control with intelligent color mixing using PowerPSoC
Interface to custom LED daughter boards through screw terminals from the PowerPSoC mother board
Flexible input voltage options (7 V to 32 V)
Debug capability provided by the PowerPSoC On Chip Debugger (OCD) device and RJ-45 jack that connects to CY3215DK ICE Cube Emulation Kit (sold separately)
PC USB connectivity through on-board USB controller
CY3271 FirstTouch RF Kit* Connector
CyFi Radio Module* Connector
Access to all Function I/O pins of PowerPSoC for additional design and debug capability
圖8. CY3267 PowerPSoC®照明評估板框圖
圖9. CY3267 LED子板電路圖
圖10. CY3267 Power EVK主板電路圖
CY3267 PowerPSoC®照明評估板材料清單:
CY3267 PowerPSoC®照明評估板設計文件見: |
| |
|
|
|
|
|
| |
|
| |
|
|
